Nitrocellulose Chip Repair/Touch-up Paint
We stock a wide range of high quality nitrocellulose lacquers and paints suitable for use on any guitar project. We’ve produced a range of colours found on popular guitar models and used our own Strat and Tele bodies for reference This is the same type of lacquer as used on vintage Fender and Gibson guitars which, over time, will produce an aged, tarnished look to your instrument. These are true lacquers, as used by top guitar makers since the 1950s. They dry very quickly and produce a hard glassy finish, unlike other “pre-cat” lacquers These paints and lacquers are very easy to apply and generally require no sanding in-between coats.
50ml of neat nitro with brush located in lid
Each pot contains 50ml of neat nitrocellulose which can be applied directly to the wood surface.
This lacquer can be thinned with cellulose thinners if required though this is not necessary for scratch & chip repairs
*Colour may vary slightly dedending on number of coats applied, wood type and preperation method. Use only in a well ventilated area. Suitable breathing apparatus should be worn
Northwest Guitars
Product Reviews
-
Item fine.
Delivered timeously.
-
Good quality and speedy delivery
Good product and service
-
Vintage white nitro repair paint.
Easy to use paint - used it for small chip repair.
Matches Color very well. -
As a guitar repairer, I am glad to know Northwest Guitars.
Faultless service.
-
Tested and approved
Good product, tested on a small surface at this time, on a vintage white mexican strat. Over the black conductive paint in vibrato cavity. Very good cover, and very, very close to original color once dried. Be aware the paint seems to be a little pinky just after it as been applied, but gets the right color while drying. Apply thin layer(s) to get the best result.
-
Nitro touch-ups
Buy with confidence! NWG Nitrocellulose paints are a great product.