(No reviews yet) Write a Review

Tonerider AC2 Alnico II PAF Humbucker Pickups

€41.73 - €51.01

In Stock: Available

SKU:
AC2
€41.73 - €51.01

THE "IMPROVED" 50S HUMBUCKER

The Alnico II Classic is a superb set for guitars that need more warmth, fullness and sustain. The earliest Gibson Patent-Applied-For (or "PAF") pickups used a range of magnets, but PAFs made with Alnico II have always held a special place in many a guitarist's heart.

If you have ever heard someone describe a PAF as "flute-like" or "more like a single coil than a humbucker" - that's the Alnico II working its magic.

At higher gain settings, the Alnico II Classic really nails the fluid distortion sound of players like Slash, who use the smooth attack and longer sustain of the neck to great effect during solos, and the tighter, fizzier tones available from the bridge for rock rhythm work.

DESIGN NOTES

The Alnico II Classic began life as a custom OEM order for a high-end UK guitar company, and we worked with their techs to get the wind just right. Cries of "more scatter!" were heard over and over again, until we got down to less than 30 turns per layer for the neck and bridge pickups - about half the number of turns per layer on vintage PAFs, but much more in line with the current best in class handwound PAF clones.

We made a few of these pickups back in 2007 - they quickly became favourites - and launched them into our standard range in 2008. The Alnico II Classic set in Nickel is currently our bestselling humbucker.

OPTIONS & SPACING

Covers: Available in black or zebra open coils, or with highly-polished gold or silver nickel covers.

Spacing: All AC-series humbuckers use 50mm spacing, as measured from the center of the low E to the centre of the high E polepieces.

Baseplate: All Tonerider humbuckers are built with medium-length 9mm baseplate legs for easy installation in a wide variety of instruments.

TECH SPECS

  • Resistance (Neck): 7.6k 
  • Resistance (Bridge): 8.5k 
  • Magnets: Alnico II
  • Bobbins: High-gloss deluxe bobbins - no other humbucker on the market has the same lustre and shine.
  • Winding: Scatter Wound 
  • Potted?: Yes
  • Hook-Up Wire: Four-conductor wiring is standard on all models
  • Screws/Springs included: Yes
     

Calibrated winding for even volume balance across all five standard positions.
All coils scatterwound on our 999-step CNC winding machines.
All coils wax-potted to avoid feedback at high-gain settings.
All parts are custom-made for the best tone possible - no standard parts are being used

Please click here for Wiring diagram

products.brand
Sub Category:
Humbuckers