Fully Loaded HSS Stratocaster 3-ply Scratchplate with Alnico V Pickups
Not too confident with a soldering iron? Then this is ideal. Just remove your old scratchplate, connect up the output jack and this is ready to go!
The scratchplate is HSS configuration, with a humbucker in the bridge, accompanied by two single coil pickups.
All pickups are manufacured by Artec, from their OEM range, which are available only to manufacturers and professional guitar builders.
- Output Neck - 5.4k
- Output Middle - 5.4k
- Output Bridge - 16.5k
- 3-ply white (wh/bk/wh) scratchplate
- 500K volume and tone pots
- 5-way pickup selector switch
- 2 x tone & 1 volume knob.
- 1/4" Mono output jack
- Mounting screws supplied
Will fit most Strat style guitars, but some modding of the pickup cavities may be required if you guitar is currently fitted with 3 single coil pickups
It’s given a new lease of life to my Strat, well recommended
Very good sound and quality components for the priceI struggled with the neck fit and had to make small adjustments. I could have done a better and neater job.