CTS Short Shaft 250k Push Pull Pot - Audio Taper
CTS pots are typically used by higher end guitar builders and techs and you’ll often find them used in USA-made guitars and guitar gear. CTS Pots are extremely popular due to their sturdy build construction ensuring long lasting performance.
Shaft diameter - 0.235'' (5.95mm)
Thread - 3/8'' x 32
Thread height - 3/8'' (9.52mm)
Thread height - 3/8'' (9.5mm)
Required hole diameter - 3/8'' (9.52mm)
Cavity depth - 1'' (25.4mm)
24 spline to suit imperial sized control knobs
250k pots have a lower resistance thus send more high frequencies to the ground. This makes them great for taming overly bright and harsh sounding single coil pickups. Nobody likes a shrill or piercing single-coil which is why you’ll find 250k pots on the all the purveyors of single coil sound such as Fender, Squier, and Danelectro.
Push Pull Pot
The Push Pull Pot, particularly in the modern era of guitar has become one of those must have electric guitar modifications, adding further versatility to the already Swiss Army Knife-esque electric guitar armoury. They can do various functions but are most commonly used to split humbuckers (known as coil splitting or coil tapping) as well as reversing the phase of pickups which can give you some amazing tonal options.
Audio Taper Pots
Instead of allowing signal through in a straight line, an Audio Taper Pot does it with a curve in the middle, giving a more perceivable change in sound over the course of a full turn of your guitar knob. A lot of guitarists prefer having control in a smaller portion of the guitar knobs as it is more useful in a live scenario, giving easier control for volume swells as well as the speed of change when riding the volume to go from clean to dirty or vice versa.