Squier Style Semi-Closed Back Machine Heads
Set of 6 high quality machine heads for any guitar project.
Available in left or right handed versions. Or choose 3-a -side for Les paul style guitars
These machine heads are made in the same factory as our Wilkinson range of guitar turners and boast the same solid brass gears and 19:1 tuning ratio for great stability and control
- Suitable for any guitar headstock with 8mm tuner holes.
- Bushings push directly into the headstock
- Complete with colour matched bushings and screws
Posted by Unknown on 29th Jun 2017
fitted squier ok
Good quality but may not fit your squire.
Posted by Matt on 26th Jun 2017
Brought as a drop in replacement for a squire bullet hard tailed strat 2017 model. Was advised that they were designed to be a direct replacement for squire strats. (Although couldn't be certain if they would be for my model)
Seemed like a good quality tuner for a very reasonable price. However they do not fit my model squire strat directly. The screw holes do not line up. As they are close though it would require dowel filling the existing holes to avoid wood splitting or boring through into old holes. The bottom hole would also slightly overlap the old one which could cause problems.
Would advise to go for vintage style tuners instead because at least the new holes you will have to drill would be far enough away from old holes not to cause problems.
Northwest service quick and helpful.