Telecaster/Stratocaster Compatible Bullet String Ferrules
Telecaster/Stratocaster Compatible Bullet String Ferrules
Low stock: 1 left
Shipping & Returns
Shipping & Returns
Order before 3pm for same day despatch Monday-Friday
Free shipping on UK orders over £199*
See our full shipping/returns options here
- Perfect for that string through body build or repair
- Collar sits flush to the guitars surface.
- Ideal for Fender Bullet Strings but work equally well with any others
- Collar width - 8mm
- Body Width - 6.8mm (1/4")
- Height - 11mm (4/10")
Specifications
Specifications
These were actually a replacement as I’d previously ordered the wrong ones!
They are a very tight fit (in a good way) and require a hammer a a block of wood to get them to seat fully. Make sure they are square to the body before you hit them home. If they go in at an angle I think they would be difficult to realign and would cause some damage if you tried to extract them. Mine seated well.
When buying guitar body from Northwest Guitars I also bought the hardtail bridge including the string Ferrules. They do not compromise quality of their products. This goes for String Ferrules Too.
I received these and they are fine but the diameter is not 6.3mm more like just under 8mm. Not a problem for me, but worth noting.
have to order again due address discrepancy .